Skip to content
Open calculators

Case Packing Count Calculator

Estimate the maximum whole count of identical rigid products that fit inside a rectangular case by checking all six axis-aligned orientations. Formula: count per orientation = floor(case L/product L) × floor(case W/product W) × floor(case H/product H); result is the maximum. Use inside case dimensions. Excludes nesting, product deformation, clearances, and mixed orientations.

Example values are prefilled to demonstrate the calculation. Replace them with values for your product, package, equipment, and operating conditions.

Inputs

Case and product dimensions

Range: at least 0.0001 in

Enter usable inside length in inches, not outside carton length.

Range: at least 0.0001 in

Enter usable inside width in inches.

Range: at least 0.0001 in

Enter usable inside height in inches.

Range: at least 0.0001 in

Enter the product's rigid bounding dimension in inches.

Range: at least 0.0001 in

Enter the product's second rigid bounding dimension in inches.

Range: at least 0.0001 in

Enter the product's third rigid bounding dimension in inches.

Result

Products in orientation A (L×W×H)
80 units/case
Products in orientation B (W×L×H)
72 units/case
Products in orientation C (H×W×L)
60 units/case
Products in orientation D (L×H×W)
80 units/case
Products in orientation E (W×H×L)
60 units/case
Products in orientation F (H×L×W)
72 units/case
Estimated whole products per case
80 units/case
Selected orientation
Product L×W×H

Calculation

Products in orientation A (L×W×H)
—
Products in orientation B (W×L×H)
—
Products in orientation C (H×W×L)
—
Products in orientation D (L×H×W)
—
Products in orientation E (W×H×L)
—
Products in orientation F (H×L×W)
—
Estimated whole products per case
—

Related calculators